Somfy THERMO SUNIS INDOOR WIREFREE RTS SUN SENSOR User Manual download pdf

DESCRIPTION

PAGE 1 REV 5

SOMFY INSTRUCTIONS

™

THERMOSUNIS WIREFREE RTS

LIGHT & TEMPERATURE SENSOR

Part# 9013708

The Thermosunis RTS Light and Temperature Sensor is a wireless transmitter compatible with RTS motors and externally mounted RTS

receivers. Window or Sill mounted, the Thermosunis RTS operates motorized window coverings in accordance to room temperature or

the amount of sunlight received. Sensitivity (threshold) settings can be adjusted to accommodate various sunlight intensity and room

temperatures to provide the ultimate in comfort and protection from harmful UV rays.

Commands are transmitted by radio waves at 433.42 MHZ

Power: 3V Lithium battery, CR430

Operating temperature: 0 deg. C/32 deg. F - +60deg. C/140 deg. F

Range: Up to 65ft.

Mount: Window glass/sill

Dimensions: Diameter 2 3/16” /(55.5mm) x Depth 3/4” /(19mm)

Indoor Use Only

PROGRAMMING: ADDING A THERMOSUNIS WIREFREE™ RTS SENSOR - INITIAL INSTALLATION

NOTE: During initial programming, it is recommended that power is provided only to motor or RTS receiver being programmed.

1. Carefully remove rear cover to expose sensor control setting panel.

2. Set the RTS Receiver or Motor into Programming Mode

(Refer to the installation instructions of the relevant RTS

receiver or motor for this procedure).

3. Slide the On/Off Selector Switch to the ON or position.

Sun LED Indicator will illuminate for 5 seconds then extinguish.

4. Using a paper clip, pen or similar device, briefly press the Programming

Button (for 1 second) located on the control setting panel of the

Thermosunis (See Figure 1). The RTS receiver or motor will confirm

the addition of the Thermosunis sensor in their respective manners.

NOTE: Repeat steps 1-3 when multiple RTS motors or receivers are required to operate

from the Thermosunis sensor.

On/Off Selector Switch

Programming

Button

Control

Setting

Panel

PROGRAMMING: DELETING A THERMOSUNIS WIREFREE™ RTS SENSOR FROM MEMORY

1. Using a paper clip, pen or similar device, press and hold the Programming Button

(approximately 3 seconds) on a previously addressed Thermosunis or Telis Transmitter.

(See Figure 1). The RTS receiver or motor will confirm Programming more their

respective manners.

2. Using a paper clip, pen or similar device, briefly press the Programming Button

(for 1 second) located on the control setting panel of the Thermosunis

to be deleted (See Figure 1). The RTS receiver or motor will confirm the deletion of

the Thermosunis sensor in their respective manners.

NOTE: Step 1 should not be performed with the Thermosunis intended for deletion.

Rear Cover

Sun LED

Indicator

Figure 1

1 2 3 4 5

Summary of Contents

Page 1 - THERMOSUNIS WIREFREE RTS

Page 2 - SETTING SUNLIGHT SENSITIVITY

Thermosunis Sensor for INDOOR USE ONLY™INSTALLATION: MOUNTING THE THERMOSUNIS WIREFREE RTS SENSOR TO WINDOW OR SILL1. Attach the ‘screw-in” suction

Page 3 - *Command Mode 1

Function SelectorFIGURE 6ON/OFFSun/TempSelector SwitchSETTING THE SENSOR SENSITIVITY (THRESHOLD) - SETTING TEMPERATURE SENSITIVITY1. Carefully remove

Page 4 - DEMONSTRATION MODE

FIGURE 6ON/OFFSun/TempSelector SwitchMode ButtonTemperatureLEDIndicator© Copyright Somfy Systems, Inc. 1/2010PAGE 4 REV 5OPERATION: STANDARD OPERATING

Page 5 - TROUBLESHOOTING GUIDE

TROUBLESHOOTING GUIDE© Copyright Somfy Systems, Inc. 1/2010PAGE 5 REV 5Window covering does not react to Thermosunis sensorWindow covering movestoo fr

Comments to this Manuals

No comments

Somfy THERMO SUNIS INDOOR WIREFREE RTS SUN SENSOR User Manual

Browse online or download User Manual for Sensors Somfy THERMO SUNIS INDOOR WIREFREE RTS SUN SENSOR. SOMFY THERMO SUNIS INDOOR WIREFREE RTS SUN SENSOR User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Sensors Somfy THERMO SUNIS INDOOR WIREFREE RTS SUN SENSOR