Somfy TILT WIREFREE RTS User Manual download pdf (Page 2)

Tilt WireFree RTS Programming & Operation Instructions

STEP FOUR

Setting Limits (Slat Positions)

Press MY (stop)

Button

Press MY (stop)

and UP Button

Press MY (stop)

and DOWN Button

Starting with slats in down (closed) position.

1) Press and hold the UP or DOWN button on the transmitter

to reach the desired lower limit (slat position).

4) Once desired upper limit (slat position) is reached, press and

hold the MY (Stop) and DOWN buttons simultaneously until the

blind begins to tilt downward, then release.

3) Press the MY (Stop) button when the blind reaches the desired

upper limit (slat position). If necessary, adjust the desired

slat position with a brief press of either the UP or DOWN button.

2 ) Once the desired lower limit (slat position) is reached, press and hold

the MY (Stop) and UP buttons simultaneously until the

blind begins to tilt upward, then release.

Press &

hold UP

or DOWN

Button

Check Polarity (blind direction) MUST BE DETERMINED BEFORE SETTING BLIND LIMITS

STEP THREE

Press and hold the DOWN button and confirm the blind tilts down.

Press and hold the UP button and confirm the blind tilts up.

·If blind direction is correct, continue to Step 4.

·If blind direction is not correct (in reverse), press and hold

the MY (Stop) button on the transmitter for 2 seconds.

Blind will jog. Blind direction is now corrected. Blind

movement should now correspond to the direction button

on the transmitter.

Telis Modulis Decora

1 2 3 4 5 6 7 8

No comments

Somfy TILT WIREFREE RTS User Manual Page 2